銳亞木工機械D80M系列雙端銑

詳情請瀏覽銳亞的官網：www.reignmac.com
銳亞木工機械 D80M系列 雙端銑/雙端齊邊開榫機

配備跳鋸跳刀，加長滾動式鏈帶，可安裝粉碎刀——D80M板式/實木專用重型雙端銑。

專業解決：加工厚度120mm以?xún)?nèi)的木門、板式家具、實木家具、水泥刨花板的兩端成型批量加工。

D80M系列雙端銑優異特性
1. 切槽跳鋸和跳銑裝置，有效解決了加工木料的撕裂現象。
2. 分離式切槽鋸，切斷鋸設計，便于客戶分別加工不同類型的產品時，可選作下刀或上刀加工。
3. 所有的刀軸都可調角度，更方便實現斜截，倒棱，開槽等加工工藝。
4. 采用高精密直線導軌機構定寬，運動精度高，耐磨性好，確保了機構調節時的位移精度，保證了木料加工寬度的精度要求。
5. 導軌潤滑油泵，能有效減少大拖板的運動摩擦，提高導軌壽命。
6. 切斷鋸配置11KW電機，并可安裝粉碎刀，特別適合于大切削量板材加工。
7. 剛性立柱及拖板設計，確保滿足重型切削的需要。
8. 加長式鏈帶設計，更有利于大規格板料的送進。
9. 采用滾動式送料履帶，履帶裝備了滾動軸承支持運動，運動平穩，定位準確穩定可靠，噪音低。
10. 所有鏈節采用高牌號鑄鐵材料，經過熱處理后，在CNC機床加工而成，確保各鏈節的精度。
11. 壓緊帶與送料鏈帶的兩檔差速設計，無論工件靠前靠山或后靠山，都可以實現靠貼基準而送進。
12. 獨立支撐的傳動軸座結構，讓鏈帶的運動更平穩。
13. 主軸配備高速精度軸承，銑刀轉速達7500r/min。
14. 進料靠尺可調節高度，更能滿足不同厚度板材的基準定位要求。
15. 各刀軸配有讀數顯示器，準確顯示刀軸調整的位置尺寸。
16. 機器床身兩導軌中心距達1105mm，各零部件設計強壯，有效地提高了機器的穩定性。
17. 采用變頻送料，送料速度達到5～25m/min，提高了生產效率。
18. 控制操作界面采用觸摸屏方式，提供了方便，快速，直觀的操作，減輕了操作者的勞動強度，減少了調節時間，提高了生產效率。
19. 選用國際品牌電器元件，提高機床工作的穩定性。
20. 通過PLC自動控制的鎖緊裝置對直線運動導軌進行自動鎖緊，不但減輕了操作者的勞動強度，而且保證了工作臺平穩，提高了木料加工的產品質量。
21. 壓緊帶采用優質材料，耐磨性能好。
22. 通過PLC自動控制加工寬度和加工厚度，只要輸入調節寬度，厚度的數值便能自動定寬，定厚，寬度調節精度達到±0.1mm，加工定位準確直觀，更方便操作。
23. 配有出料輔助導輪。
24. 全密封式安全防護罩，安全防護門開閉采用氣動控制，有效地避免木屑飛濺和隔離噪音，并起到安全保護的作用。

http://www.reignmac.com
Double End Tenoner series D80M

Provided with jumping saw and jumping milling unit, lengthen the rolling chain and install the hogger on cut-off saw.-D80M heavy-duty DET specialize for panel/solid wood.

Professional solution for volume producing two ends profile of wooden door, panel furniture, solid wood furniture, MBF with max thickness 120mm.

D80M outstanding character
1. With the jumping device in the scoring saw and the first milling unit, can prevent tearing effectively when processing.
2. Design with separation-type scoring saw and cut-off saw, it is convenient for the customer to choose working as top spindle or bottom spindle according to different type of products.
3. Each spindle can rotate, convenient to achieve angle-truncate, tenon, groove and etc.
4. Adopted widen by high precision linear orbit, machine can run in precision and wearable. It assure the precision when widen the working size, also can guarantee to fit your highly requirement for setting the working width.
5. Orbit lubrication can reduce the frictions of slide when moving, increase the nature life of orbit as well.
6. The cut-off saw equipped 11KW motor and can be installed hoggers, which is quite suitable to process the big cutting capacity materials.
7. The design of rigid column and carriage to ensure the needs of heavy-duty cutting.
8. Much better to feed the big size panels with the lengthen chain belt design.
9. Supported with the roller bearing in the feeding belt, make the movement more stable and reduce the noise.
10. In order to assure every chain board with high precision, we use the high hardness cast iron and treated with high temperature and machining by CNC.
11. Top pressure and bottom conveyor belt has the design of two different speed, no matter before or behind the fence dot , can be achieved to feed against the benchmark.
12. Individual transmission shaft seat structure makes operation of the chain more stable.
13. Each spindle is equipped with high precision bearing, spindle speed of milling units reach to 7500r/min.
14. Adjustable height on in-feed fence is better satisfied with basis positioning requirements for different thickness of wood panel.
15. Each spindle is configured with read out, can display the position of spindle veracious.
16. Width between two orbits of machine base reaches to 1105mm. Strongly spare parts improve the machine stable effectively.
17. Adopted inverter for feeding, make the feed speed reaches to 5~25m/min, increase the productivity.
18. Setting all of the parameter by PLC, easy to view and control. Reduce labour and the time for setting parameter, improve the productivity effectively.
19. Adopted the high class electric component to build up the perfect electric system can increase the stabilization.
20. Through the automatic locking which controlled by PLC, can lock the linear orbit automatically. No only can reduce the labour but also can assure the stable of the machine base, improve the quality of the work pieces.
21. Adopted excellent material to make of the pressure belt, keep good wearable.
22. Only input value of working width and thickness to the PLC, you can control the width and thickness. Precision of setting width is ±0.1mm. Easy to locate the workpieces and convenient to operate.
23. To equip with out-feed guide roller.
24. Sealed safety enclosure is controlled by pneumatic, can reduce noise levels, improve extraction and operator safety.